SeaFit V20 Guía para resolver problemas descargar pdf (Pagina 16)

16 Seafit V20 Radio Owner’s Manual

17. Keypad Lock

There may be times when you don’t want

to inadvertently press a key on the radio’s

keypad. In this case, you can select

Keypad Lock by pressing the

I key

(below the

PTT key on the left hand side)

for two seconds. This will cause the key-

pad lock indicator two be shown, and the

Radio Status Display will show KEY

LOCK ON

. (Fig. 18) While the keypad is

locked, the keypad will not respond to

key presses. Press the

I key for another

two seconds to unlock the keypad. This

will extinguish the Lock indicator, and

show KEY LOCK OFF on the Radio

Status Display.

• When keys are locked, only the PTT

key and I key function.

• Locking the keypad can be confus-

ing. When the radio doesn’t seem to

be operating properly, see if the

LOCK indicator is on.

18. Restore Factory

Settings

To reset all of the customized settings to

the original factory settings, hold the

16/9/TRI key down while turning on the

radio. Customized settings and channels

stored in memory will be lost when facto-

ry settings are restored.

Factory Settings

Country Mode ……………………USA

Last Used Channel …………Channel 16

WX Mode ……………………Disabled

Last Used WX Channel ………………01

Key Lock ……………………Disabled

Triple Watch ……………………Disabled

WX Alert ……………………Disabled

STEP …………………………Disabled

TX Output Power ………………High

All Channel MEM …………Disabled

Squelch Level …………………………4

TOT time ……………………5 minutes

Fig. 18: Key Lock Display Display

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comentarios a estos manuales

Sin comentarios